Diminishing water supplies is a world-wide problem. In the United States, with population increase and an increasing decline in water supply, the best current solution is a reduction in water use. A great solution to reducing water use in landscaping is using graywater irrigation! WHAT IS GRAYWATER? Graywater is all wash-water waste generated by a home or business. This is water from the washing machine, the sinks, bathtubs and showers and can be re-used! However, toilet waste and waste from garbage disposals and dishwashers is blackwater which contains high levels of nitrogen and pathogens and cannot be used in irrigation. GRAYWATER CAN BE USED FOR IRRIGATION: Yes, graywater can be used for irrigation, but the codes and regulations on this process varies from state to state. Californians, for instance, have used graywater irrigation systems illegally for many years. Due to these practices, the California Graywater Code was re-written with significant changes. This code designates three types of graywater systems: Clothes Washer System: This is probably the most commonly used as it is the easiest to implement, but there are restrictions on its use. It can use only a single washing machine in a family dwelling, and must be a domestic, not a commercial machine. This system may only use gravity or the pump from the washing machine itself to irrigate the desired areas in the yard or garden. The washing machine system may use up to 15 gallons per day per person in the household. It does not require a construction permit as long as it does not require cutting of the pipes that exist. Simple System: This system also serves a one or two family residence. The discharge of graywater is greater than the clothes washer system, and discharges up to 250 gallons per day. A construction permit is needed for a simple system. Complex System: This is a graywater system that uses over 250 gallons per day, and also requires a construction permit. The simple and complex systems are subject to inspection and possible percolation tests until they are approved.To install a whole-house system is a fairly simple matter in new construction, but is difficult in existing buildings.
WHAT ARE SOME OF THE BASIC REQUIREMENTS FOR USING GRAYWATER:
Two inch covering regulation: The irrigation system using graywater must be covered by 2” of some kind of material to avoid contact with the graywater. Drip system of graywater irrigation: The drip system works the best with graywater irrigation. Spray irrigation is not to be used with graywater. Also, graywater is not to have run-off or ponding, and cannot reach any body of water or storm drain. No irrigation of crops intended for human consumption: Graywater may not be used for growing food. In addition, human contact with the system should be minimized.
More info here: https://greywateraction.org/requirements-for-no-permit-systems-in-california/ Pacific Vista Landscape is focused on water conservation. Re-using your graywater to irrigate your landscape can not only result in water reduction, but is a great way to keep a beautiful garden. Our professional team are experts with the latest irrigation technology and can implement a graywater re-use system for your property. We will even evaluate your current system for free! Give us a call and see how we can save you water AND money now and in the years to come!
Updated: Jul 3, 2022
The term comes from the Greek word 'xeros' which means 'dry' combined with 'scape' meaning 'dry landscape' but really it means landscaping with plants that need minimal water. Since about 70 percent of the water consumed by an average single-family home is used outdoors, the best place to start conserving water is in your garden. However, xeriscaping with plants that do not need a lot of water does not mean your garden has to look desolate! Southwestern states have been xeriscaping the longest due to the fact that they have dry climates and it makes sense to not fight mother nature by growing high maintenance gardens and lawns. But with water becoming a diminishing resource everywhere, other states throughout the U.S. are now xeriscaping too.
Luckily, in Southern California, we have many drought resistant native plants and a climate that allows us to use low water plants from other similar dry climates like Australia, South Africa, the Middle East, and Mediterranean areas. Many of these plants are lush and beautiful and visually completely different than a typical southwest garden of cacti and rocks. There are many wonderful options and we live in the perfect place for xeriscaping! Water is still necessary with xeriscapes, especially when plants are new. However they become more drought resistant once established. Many drought tolerant native plants in the wild naturally have deep roots as part of their survival. New, nursery bought plants in pots will take a couple years at minimum to achieve the same deeper root systems as their counterparts in the wild.
Xeriscapes work well with low-pressure systems that deliver water right to the roots of the plants but don't go everywhere. A sub-surface water source not only feeds the roots without wasting it on the surface where it can evaporate, it encourages the roots to grow deeper beyond the root ball which ultimately makes it hardier and more drought resistant in the future. Once roots are established, they will require even less supplemental water. Another important component to xeriscaping is using a ground cover like gravel or mulch. Mulch can be made from organic materials including leaves, grass clippings, straw, shredded bark, sawdust, wood chips, and cardboard. There is also rubber mulch made from recycled tires which does not decompose quickly. Ground cover does a multiple of jobs when it comes to xeriscaping. Most importantly, it helps keep the moisture in the soil and keeps the ground cooler in the summer. It also keeps weeds from competing with plants for water and nutrients.
Xeriscapes are most stunning when designed with a combination of softscapes and hardscapes. Softscape refers to trees, bushes, plants, ground cover, and the living aspects of the garden. Hardscape is the addition of pathways, planters, and outdoor living areas that can make your garden more inviting, accessible, and visually interesting. Hardscapes also mean less softscapes, and less water. The key is to design a layout that is a balance of the two so that your garden complements your home and is low maintenance; saving you water and money!
There are rebates being offered in Southern California to replace lawns, find out more here. We are also certified experts installing smart-water irrigation systems that are efficient and cost effective and are rebate worthy too!
Our team at Pacific Vista Landscape Services are experts when it comes to xeriscaping and knowing the vast variety of drought resistant plant options. We can work with you to design incredible soft and hardscapes to enhance your property which not only look great but will save you money too. Having a beautiful, low maintenance garden makes sense now and in the future!
Growing healthy trees in your yard depends on several different factors, but starting with the right tree for the right place should be the first consideration.
The Urban Forestry Ecosystems Institute located at Cal Poly in California, has a data base that will help you select the proper tree for your location and your needs. You can search the site by entering your zip code and the attributes of the tree that you want here: ufei.calpoly.edu/index.lasso
Planting Your Tree
Once you have selected the tree that is best for your location, it’s time to plant. Like everything else, there is a right way and a wrong way to do this. Following the correct planting steps is important to growing a healthy tree.
First, make sure you select the right location in your yard for your tree. Make sure the tree you are planting has plenty of room and will not outgrow its location. Then determine that the soil in which you are planting is compatible with the tree you have chosen. Also, make sure that your tree will have the right amount of sun and shade that is recommended for your particular type of tree.
Prepare a hole that is twice as wide as the root ball (some landscaping experts recommend a wider hole, up to three times as wide.) A wide hole will insure fast growth of the tree. The depth of the hole should be determined by the height of the root ball. The right depth will prevent settling.
Remove the wire basket and burlap from the root ball.
Add a starter fertilizer and fill around the root ball with the soil you removed for
planting.
Deep water the tree, and water each day for seven days; then water twice a week for week two, and once a week afterwards.
Care and Feeding Mulching: It is important to know that mulching is very important to the health of your newly planted tree. Mulch acts to retain water, preventing the roots from drying out, and provide protection from the heat and cold. It keeps weeds away from the tree roots and prevents compaction of the soil around the tree.
Watering: For newly planted trees, water right after planting. Not enough water will damage a tree, but over-watering is harmful as well. The proper amount of watering can be determined by feeling the soil around the tree. The soil should be moist but not soggy. Allowing the soil to dry for a short time between waterings, is good for the tree because it allows the soil to oxygenate. After the first two years, the root structure of the tree should be well established and will not need the kind of monitoring that a newly planted tree requires.
Pruning: Care must be taken when pruning newly planted trees because poor pruning can damage a tree for the rest of its life. The pruning of these young trees should be done to remove remove dead or broken branches. More aggressive pruning should wait until the tree is two to three years old.
Signs of a Healthy Tree
Is There New Growth: If you have had your tree for a year or more, there should be new growth appearing each year.
Check for Dead or Broken Branches: Since dead and broken branches invite insects and make the tree more susceptible to disease, they should be pruned off. Hint: If a branch is green underneath the bark when scraped with your fingernail, it is alive.
Check the Tree’s Bark: The bark should be intact. If it is loose or peeling, there is probably a problem. The truck should not have large cracks or holes and should be free of fungi.
Examine the Leaves: Leaves should be the appropriate color for the season. Wilting of the leaves indicate stress caused by too little or too much watering, or too much or too little sun. Evergreens should not have bare patches without needles, and deciduous trees should be full of leaves in the blooming season. Areas where leaves are missing can indicate damage or disease.
A proper tree care program will allow fluid growth patterns and wind penetration. This will condition your trees for long term healthy development. All of our pruning practices are based upon the International Society of Arboriculture industry standards.
Our Pacific Vista Tree Service' professionals will provide your property with a complete inventory of all trees and organize these trees on a multiple year tree care plan. We will place the trees on an appropriate frequency to best suit a given species.
